faarm:storei [Assay and Acquisition of Radiopure Materials]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Acquisition and Storage of Materials ======


  - Description/Name: Material Acquisition and Storage at the 800-ft level
  - Planned use (be specific): Produce pure materials and storage materials
     - Primary function: Production and storage
     - Temporary and permanent storage: Both
     - Sample and detector handling: 
     - Jigs, fixtures, scaffolds, etc. necessary 
     - E & O activities: Daily or weekly
  - Occupancy:
     - Steady: copper, lead, parts, and cables for 100 tons
     - Peak: 1000 tons
  - Adjacencies (list/distance):
  - Space size (gsf and/or WxLxH): two rooms for 6m x 20 m x 3 m 
  - Experiment Systems:
  - Shielding:
  - Floor load (PSF): 2000g/cm2
  - Material handling (cranes, etc.) two cranes
  - Finishes (walls/floor/ceiling): 2000g/cm2
  - Casework:
  - Storage:
  - Furniture/Fixtures/Equipment (non-experiment): Crane for moving materials in/out
  - Mechanical:
     - Environmental conditions: Temperature and humility control,  and radon reduced air
     - Clean class: 10,000
     - Ventilation: 100 cfm
     - Exhaust: 100 cfm
     - Plumbing (domestic, waste, systems): water supply for assay materials
     - Fire Suppression:
     - Building Management System:
     - Fume hoods:
     - Chilled water
     - Other: 
  - Electrical:
     - Power (clean and dirty): clean
     - Lighting:
     - Low Voltage/Data/Communication: 
     - Fire Detection/Alarm:
     - Other: 
  - Acoustical:
  - Vibration Isolation:
  - EMI/RFI Isolation:
  - Hazardous materials: General waste disposal: 1  hazardous chemical disposal: 1 lead contaminated ppe disposal: OSHA compliant layout
  - Special Consideration (expansion, etc.):

User Tools

Page Tools