Campuses:
This is an old revision of the document!
Install sheet: tpk.pdf
| Q330 serial | 0100000A27A010C9 |
| Q330 tag | 851 |
| Q330 IP | 192.168.1.105 |
| Sensor type | STS-2 |
| Sensor serial | 109832 |
| Baler tag | 05943 |
| Wilan IP | 192.168.1.13 |
The sensor below was originally installed at this station, but was discovered to be faulty and was replaced on 4/3/2015. The current station information is given above.
| Sensor type | Guralp-3T |
| Sensor serial | T31417 |
| Date | Comments | Update by |
|---|---|---|
| 03/30/2015 | Tanner and Daniel installed the station. Had problems with getting the seismometer working well and getting the Q330 to wake up the Baler. Will watch the seismometer remotely and see if we need to replace it. | Tanner |
| 04/03/2015 | Tanner and Daniel replaced the Guralp with an STS-2. Seems to be working better. Also figured out how to get the Q330 to wake up the Baler (need to set the interface to Serial 2 rather than Ethernet when using the Clie). | Tanner |