Differences

This shows you the differences between two versions of the page.

--- tdmnoisemodel [2017/09/18 15:10] – created robrient
+++ tdmnoisemodel [2017/09/18 16:17] (current) – robrient
@@ Line 1: / Line 1: @@
-Noise Modeling for CMB Probe
+====== Noise Modeling for CMB Probe ======
 Roger O'Brient
@@ Line 5: / Line 6: @@
 What's done so far:
-  * Loading model constructed
+  * Loading model constructed, applied to 30K Primary
-  * Compute bolometer Gs & taus
+  * Computed bolometer Gs & taus
-  * Plot NEI vs frequency
+  * Ploted NEI vs frequency
-  * Compute NEP white-noise plateau
+  * Computed NEP white-noise plateau
-  * Compare to B2/Keck Data
+  * Compared to B2/Keck Data
-  * Flicker noise study (emperical results, pulled from the literature)
+  * 1/f noise study (emperical results, pulled from the literature)
 To do:
   * adjust the sampling frequency and nyquist inductors to study how aliased noise changes
-  * Repeat analysis for 4K primary (?)  Repeat analysis for more realistic loads from window and filters.
+  * Repeat analysis for 4K primary (?)  Also repeat analysis for more realistic loads from window and filters, whose loading will not be negligable.
   * Generalize to higher MUX factors
   * Make plots of noise vs stage temp and optics for Chris' cryo design.
@@ Line 20: / Line 21: @@
 Slide decks for public discussion:
+  * {{::Noise_for_CMB_Probe_v2.pdf|Imager Telecon 20170919, TDM noise Study}}
+  * {{::flicker_noise_CMB_probe.pdf|Imager Telecon 20170919, 1/f noise Study}}
+Note: slides are a funny way to add content to a wiki, but since they lend themselves well to JPL's document release protocol, I will put most technical content in that form.

User Tools

Differences

Page Tools