Campuses:
800 level, old station accessed via Ross. Access via Yates should be possible, but probably no motor.
Status: Network and power should be available.
Install sheet: 800.pdf
| Q330 serial | 0100000A27B47AA6 |
| Q330 tag | 1067 |
| Q330 IP | 204.114.29.13 |
| Sensor type | STS-2 |
| Sensor serial | 40301 |
| Baler tag | 05246 |
| GPS transceiver serial | DY5A10105 |
| Switch label | 800 SW 1 |
| Date | Comments | Update by |
|---|---|---|
| 01/14/2015 | Installed full station (Tanner, Daniel, Vuk, Tom, Jamey). Waiting on cable parts so the unit was left unpowered and without GPS time. | Tanner |
| 01/16/2015 | Brought GPS cables and power cables to power station on. Had some trouble getting GPS time, but in the end it worked. It may take up to an hour for the GPS to lock. | Tanner |
| 02/02/2015 | Seismometer centered remotely. | Tanner |
| 03/27/2015 | Seismometer centered remotely. | Tanner |
| 04/07/2015 | Seismometer centered remotely. | Tanner |
| 07/17/2015 | Seismometer centered remotely (by Gary). | Tanner |
| 08/03/2015 | Seismometer centered remotely. | Tanner |
| 09/13/2015 | Seismometer centered remotely. | Tanner |
| 01/21/2016 | Seismometer centered remotely. | Tanner |
| 03/10/2016 | Attempted many remote centerings of seismometer, mass 2 is consistently stuck and can't get it unstuck. Gary has mentioned this, we are asking PASSCAL for a replacement. | Tanner |
| 08/08/2016 | Seismometer centered remotely. | Tanner |